familyname=Quad-LN_S
manufacturer=Tam Valley Depot
definitionSource=JMRI
LOCONETOPSBOARDCV=4,""
CV=4,""
CV=4,""
CV=5,""
CV=6,""
CV=7,""
CV=8,""
CV=11,","Relay","","Signaling","","Servo","","Turnout","2""
CV=11,""
CV=11,""
CV=11,","Both IO","","Main IO, Aux Servo","","Main IO, Aux Turnout","","Both Servo","3","Both Turnout","3""
CV=11,""
CV=11,""
CV=11,""
CV=11,""
CV=11,""
CV=11,""
CV=11,","Disable","","Enable","""
CV=11,","Perform Internally","","Visible on Loconet","""
CV=11,","Both IO","""
CV=11,","Disable","","Enable","""
CV=11,","Disable","","Enable","""
CV=11,","Disable","","Enable","""
Servo16lt24CV=11,","Blink when Locked","","Blink when Unlocked","""
CV=12,","Normal","","Inverted","""
CV=12,","Perform Internally","","Visible on Loconet","""
CV=11,","Disable","","Enable","""
Versionge49CV=12,","Local IO Only","","Local and LocoNet","""
CV=12,","Ignore","","Respond","""
Versionge50CV=24,","Disable","","Enable","""
CV=24,","Always","","On Change Only","""
Versionge51CV=24,","One Turnout","","Whole Port","""
CV=24,","No Report","","Sensor Report","""
CV=12,","Always On","","Off when Stopped","""
CV=12,","Disable","","Enable","""
CV=12,","1 Sec","","2 Sec","","4 Sec","","8 Sec","""
CV=12,","Normal","","Disable","""
CV=17,""
Versionlt51CV=13,14,""
CV=2,3,""
CV=2,3,""
CV=9,10,"ServoMaineq0"
CV=15,16,"ServoAuxeq0"
Versionge51CV=33,34,""
CV=35,36,"ServoMainne0"
CV=37,38,"ServoAuxne0"
CV=39,40,"ServoExpne0"
CV=41,42,""
CV=43,44,"ServoMainne0"
CV=45,46,"ServoAuxne0"
CV=47,48,"ServoExpne0"
CV=51,52,""
CV=53,54,"ServoAuxeq0"
CV=57,58,"Report DCC Changene0"
CV=1,","","""
Restore All CVs to Factory Defaults. Device Address=11000Restore Addresses to Factory Defaults. Device Address=11000Restore Servo and Input CVs to Factory Defaults.Quad-LN_SBoard AddressServo Start AddressTurnout Start AddressLock Start AddressMain IO Start AddressAux IO Start AddressSERVO Turnout Start AddressMAIN Turnout Start AddressAUX Turnout Start AddressEXP Turnout Start AddressSERVO Lock Start AddressMAIN Lock Start AddressAUX Lock Start AddressEXP Lock Start AddressSERVO Lock AddressMAIN Lock AddressAUX Lock AddressEXP Lock AddressMAIN Input Start AddressAUX Input Start AddressDCC Input AddressEXPANSION PORTModeMAIN and AUX IO PORTSModeRoute DelayServo OFF When StoppedServo State MemoryTurnout State MemorySignal State MemoryRetry on DCC BusyOutput Off Switch RequestNo Command StationInput InvertBlink indicates UnlockBroadcast Local ActionsDisable Statonary InterrogateEnable CV7 InterrogateRefresh ServosOnly Repower Servo On ChangeLock Disables LocoNet ControlOne Lock Per PortReport DCC ChangeTam Valley Depot (N3IX Engineering)Quad-LN_S  Product IDHardware revision number  Hardware VersionSoftware major version numberSoftware VersionSoftware minor version number.Software build number  Build NumberMajor Versionle2FIRMWARE VERSION 3.0 OR LATER IS REQUIRED TO USE THE Quad-LN_S_v3 TEMPLATE.DO A READ SHEET.  IF THIS MESSAGE IS STILL PRESENT THEN USE THE Quad-LN_S_v1 TEMPLATE OR UPDATE YOUR FIRMWARE.Major Versionge3FIRMWARE VERSION 3.0 REQUIRES USE OF THE Quad-LN_S_v3 TEMPLATE.DO A READ SHEET.  IF THIS MESSAGE IS STILL PRESENT THEN USE THE Quad-LN_S_v3 TEMPLATE.Major Versionlt2Firmware version 2.0 or later is required when using the Detector Board.Do a Read Sheet.  If this message is still present then update your firmware if you wish to use the Detector Board.Decoder Template File Version: 3.03.1Decoder Transform File Version: x.xx.xBasicGroup 1/4Servo16eq0Group 2/4Servo16eq0Group 3/4Servo16eq0Group 4/4Servo16eq0Group 1Servo16ne0Group 2Servo16ne0Group 3Servo16ne0Group 4Servo16ne0Group 5Servo16ne0Group 6Servo16ne0Group 7Servo16ne0Group 8Servo16ne0Group 9Servo16gt8Group 10Servo16gt8Group 11Servo16gt8Group 12Servo16gt8Group 13Servo16eq25Group 14Servo16eq25Group 15Servo16eq25Group 16Servo16eq25RoutesLED 1-12Expansioneq1LED 13-24Expansioneq1Aspect 1-8Aspect 9-16Aspect 17-24Aspect 25-32Aspect 33-40Aspect 41-48