familyname=ACC Decoders
manufacturer=MERG
definitionSource=JMRI
CV=1,"Low 7 bytes of Address CV1"
CV=2,"Outputs Active"
CV=2,","Off","0","On","1"Output Active bit 0"
CV=2,","Off","0","On","1"Output Active bit 1"
CV=2,","Off","0","On","1"Output Active bit 2"
CV=2,","Off","0","On","1"Output Active bit 3"
CV=2,","Off","0","On","1"Output Active bit 4"
CV=2,","Off","0","On","1"Output Active bit 5"
CV=2,","Off","0","On","1"Output Active bit 6"
CV=2,","Off","0","On","1"Output Active bit 7"
CV=3,"A Output (x10) Millisecs"
CV=4,"B Output (x10) Millisecs"
CV=5,"C Output (x10) Millisecs"
CV=6,"D Output (x10) Millisecs"
CV=7,"Decoder VersionVersione Decoder: Version d�codeur: Decoder Version: "
CV=8,"ManufacturerID Costruttore: ID constructeur: Hersteller ID: "
CV=9,"High 3 bytes of Address CV9"
CV=1,"Turnout Address of Output 1 (1-2041)"
CV=1,"Turnout Address 2"
CV=1,"Turnout Address 3"
CV=1,"Turnout Address 4"
CV=1,"Decoder Address (1-511)"
CV=29,"Configuration"
CV=33,"Lenz Toggle Mode"
CV=33,","Off","0","On","1"Toggle Mode output 1"
CV=33,","Off","0","On","1"Toggle Mode output 2"
CV=33,","Off","0","On","1"Toggle Mode output 3"
CV=33,","Off","0","On","1"Toggle Mode output 4"
DCCACC4 SettingsCV1 to CV34          Lenz Toggle Mode (bits set) gives a toggle action for Lenz systems.Recommend Lenz Toggle Mode is 'on' for most commercial DCC systems.Addressing, enter decoder address or turnout addressDecoder Address (1-511)     Turnout Address in blocks    of 4, range 1-2024Output operation, select / deselect as requiredOutput Duration and Toggle ModeDuration of Output(x10 MilliSecs)0 = continous outputToggle Mode OutputsRead Only Information 